How To Surf 24

My version for 6630 (Probably it will work on 6680 and 6681 too)

Ok.. well i got it working for my 6630. im not much of a teacher but here it goes.

First of all !!!BACKUP YOUR PHONE!!! :P

Im using WIDCOMM BT Soft V.5.0.1.802 and Windows XP SP2 and im on a LAN.
im using IP 192.168.0.101... so check your IP also.


======== START ========

Download and install the Gnubox6630 posted here in your phone.


---PC Configuration ---

Note: "Be sure you have a BT soft(WIDCOMM "i dont know about bluesoeil") for serial connection."

- Check which ports are used for serial connections by your BT software.
- Goto CONTROL PANEL->PHONE AND MODEM OPTIONS
- Add 2 new modem by using (Under Standard Modem) "Communications cable between two computers"
and use the port used by your BT Soft. ***PLEASE MAKE A MODEM FOR YOUR TWO BT PORTS***
- Now goto NETWORK CONNECTIONS->Create a new connection
* click next
* choose "Setup an advanced connection" then click next
* choose "Accept incomming connections" then click next
* select "Communications cable between two computers(COM??)" *** SELECT YOUR TWO BT PORTS *** then click next
* select "Do not allow virtual private connections" then click next
* choose your user preferrably with administrative priviledge.. i dont know if this will matter.
!!! remember that this user will be the target of your username password in your N6630. !!!
* click the properties of the TCP IP and check the "Allow calling computer to specify its own IP address"
* click next... then finish.

--- N6630 Configuration ---

Note: "I will mention only options i have touched and worth noting"

- goto TOOLS->SETTINGS->CONNECTION->ACCESSPOINTS
- choose OPTIONS->NEW ACCESS POINT->USE DEFAULT SETTINGS
* Connection Name = "Bt"
* Data Bearer = "Packet data" (default)
* Access Point Name = "Bt"
* User name = "PCuser" <- this is your account in your computer
* Prompt password = "No"
* Password = "****" <- this is your pc account's password
* Authentication = "Secure"
* Homepage = "mobile.n-gage.com" <- any page preferrence.

-select OPTIONS->ADVANCED SETTINGS inside the accesspoint BT.
** Network Type = "IPv4"
** Phone IP address = "192.168.0.200" <- any valid IP in your network
** Name servers = "xxx.xxx.xxx.xxx <- the IP address of your pc.


--- GnuBox ---

Note: "If you got here then you should have done the above things. Hehe. Of Course if not then go do it again."

- launch GNU box.
- select OPTIONS->Install->Create Records
* This will import your BT access point and delete it from SETTINGS->Connection. Dont worry it's normal.
- select OPTIONS->Install->Set RAS login script
- select OPTIONS->Install->Set default AP to Bt
- select OPTIONS->2box Bluetooth->Serial Port
* The screen would let you select your pc from the detected BT devices.
- select OPTIONS->1box Phone
- select OPTIONS->2box Bluetooth->Serial Port
* The screen would let you select your pc from the detected BT devices.
- select DEBUG->Bring up IF
* If this succedded then you can now use your web browser

======== END ========

Note:
If you want to change anything in your Access Point, like name servers IP or phone IP. Do this.
In GnuBox
- OPTIONS->Install->Copy settings from GPRS
- OPTIONS->Install->Set to GPRS
* This will bring back your Access Point in SETTINGS->Connection.
- Edit your Access Point.
- Then REDO what you have done in the GnuBox Section of this How To.




If there are any questions... regarding this... i dont know if i can answer it anyways...
for all i know is written here. haha... have a happy surfing days again!